The decision to fuse the Surfari’s floaty fish-tail geometry with the Milligram’s weightless construction was easy. Amplid’s highly evolved BBP core and carbon laminates strips so much weight that the Millisurf literally sprints up the skin track like a pedigree greyhound. Then scrawl the perfect bottom turn into a virgin wind lip and make the most of your hard work!
Weaving through pine forests at breakneck speeds, the Millisurf is simply breath-taking. Its tapered shape and negligible swing-weight heighten agility and responsiveness to new, mind-expanding levels. Deep, crusty and chopped-up snow get slaughtered by its unique, spooned nose and spat out by its swallow-like tail.
Amplid's custom board clips create a solid connection between the two split halves and allow base-side hardware to be hidden, for snag-free riding and maintenance.
Amplid's ultra-light pow-surfing mega-split, the Millisurf, starts the 18/19 winter season by scooping an Editor's Choice Award in Backcountry Magazine, the US' best selling backcountry skiing and...
Skialper, Italy's "numero uno" ski touring and splitboarding magazine, conducted its annual Buyer's Guide test last winter and Amplid sent along a Milligram, Millisurf and Creamer Split to...
Last winter, French snowboard rag, Snowsurf Magazine, put the majority of Amplid's 17/18 snowboard collection to the test. Straight to the point and super insightful, head tester Franky and his...
"In powder it is almost unbeatable. It's extremely agile and riding is a lot of fun" - Just one of the nice things that ,Patrick Schoekel, aka Mr Splitboarding.eu, and his team of dedicated testers...
This is the best camber line for perfection skinning traction on the way up, by distributing weight and power along the entire board. Additionally this camber line provides precise control in harder conditions and at higher speeds.
|overall length (mm)||1570||1610|
|nose length (mm)||295||295|
|running length (mm)||1120||1160|
|tail length (mm)||155||155|
|waist width (mm)||260||264|
|nose width (mm)||308||313|
|tail width (mm)||292||297|
|sidecut depth (mm)||20||20.5|
|sidecut radius (m)||8||8.4|
|stance position||10 back||10 back|
|nose radius (mm)||800||800|
|tail radius (mm)||800||800|
|ref stance (cm)||56 (52-60)||58 (54-62)|
|camber||Dir. Cruise Camber||Dir. Cruise Camber|
|approx weight +/-6% (kg)||2.7-2.8||2.8-2.9|
|rider weight-range (kg)||62-84||72-94|
|active surface area (cm2)||4230||4410|
The lightest wood core money can buy. Weightless Paulownia and Balsa are carefully arranged with stronger Birch to save valuable grams without sacrificing strength.
Amplid’s Full Carbon Jacket is the most expensive fiber laminate in Amplid’s arsenal. Carbon’s tensile strength to weight ratio is unbeatable, it allows the use of thinner, almost weightless laminates to achieve the same flex profile. Its responsive and energized feel is unique.
Ultra wide, low rising tips that exist purely to create lift in powder without sucking-up speed. They add a surfy feel to skis and snowboards.
A premium sintered plastic which readily absorbs wax and will out-run your riding buddies’ bases without breaking a sweat. You better get used to waiting.
We lightly round the edges at the tip and tail, outside of the effective edge. Blunting these edges reduces chipping to the topsheet during skinning.
A convex nose profile which improves tracking and fluidity in three-dimensional snow. To retain responsiveness, the contact points are not lifted.
Using threaded bolts instead of rivets allows broken tip clips to be easily replaced, on the hill, without the need for a workshop full of tools.
Spanning a snow hole with one split ski at full stride can snap it clean in two. Extra unidirectional carbon stringers along the underside of the core increases bending stiffness, reducing “dishing” in deep snow and increasing breaking resistance.
Replacing a conventional tophseet on Amplid’s carbon touring equipment, Nano Film is an ultra-thin polyamide coating that offers great protection and improved snow-shedding properties with 50% less weight.
Tough, pre-cured composite impact plates placed beneath bindings and touring hardware significantly reduce the risk of topsheet dings and breakages.
Forged aluminium board hooks, designed in-house by Amplid’s R&D team, offer a dependable, but weightless connection between board halves and have a slick matt black aesthetic.
Spin to win with effortless style. Amplid’s HEXO2-Lite replaces specific areas of weightier wood at the tips with featherlight recycled paper honeycomb, practically eliminating swing weight.
Less heat, less sticky snow, less weight - Thanks to a special heat reflecting coating.